Grand Cherokee 4WD V8-318 5.2L VIN Y MFI (1994)
Load Compensator: Adjustments
1. Position vehicle on level surface and remove all cargo and personal equipment before making adjustments. Failure to observe these procedures can
result in unsatisfactory brake action. If a hoist is used, it must be a drive-on type. Do not use any type of twin post hoist.
Fig. 6 Proportioning Valve Lever, Link & Bushing
2. Remove nut attaching lever to valve shaft, then pull lever and retainer off the valve shaft. Remove and discard old bushing as it is not reusable.
3. Clean threads and spline on valve shaft, then connect link to avoid a false reading.
