Grand Cherokee 4WD V8-4.7L (2003)
Fig. 41 Rear Outboard Retractor
10. Disengage the retractor locator tab from the slot in the lower C-pillar.
11. Remove the rear outboard seat belt and retractor from the lower C-pillar as a unit.
INSTALLATION
1. Position the retractor in the lower C-pillar and be certain that the retractor locator tab is engaged in the slot in the lower C-pillar below the
retractor.
2. Install and tighten the screw that secures the retractor bracket to the mounting tab on the inner and outer rear wheelhouse flange. Tighten the screw
to 43 Nm (32 ft. lbs.).
3. Position the seat belt turning loop to the upper C-pillar.
4. Install and tighten the screw that secures the seat belt turning loop to the upper C-pillar. Tighten the screw to 43 Nm (32 ft. lbs.).
5. Reinstall the trim onto the upper C-pillar.
6. Reinstall the trim onto the quarter inner panel.
7. Position the rear outboard seat belt lower anchor to the rear floor panel.
8. Install and tighten the screw that secures the rear outboard seat belt lower anchor to the rear floor panel. Tighten the screw to 43 Nm (32 ft. lbs.).
9. Fold the rear seat cushion back into the seating position.
