Grand Cherokee 4WD V8-4.7L VIN N (2000)
Install Ball Joint - One Side
02-10-60-90
3.5 Hrs.
Install Ball Joint - Both Sides
02-10-60-91
4.2 Hrs.
FAILURE CODE: P8 - New Part
Repair Procedure
Set the vehicle up on the alignment rack and check the alignment against the specifications listed in the applicable service manual. The specifications
shown below are specific targets, which will provide the optimum performance for the vehicles listed above. The only adjustments, which can be made
with the original factory equipment, were caster, toe in and steering wheel center. 1999 and 2000 Grand Cherokee (WJ), caster adjustment was not
provided. The new ball joints will offer adjustments of up to 1.5 degrees for camber and caster where required.
Alignment Specifications (Degrees)