Grand Cherokee 4WD V8-4.7L VIN N (2000)
Driver Side Airbag Trim Cover Retainers Remove/Install
4. Remove the upper and lower trim cover retainers from the airbag housing studs.
5. Disengage the horn switch feed wire connector retainer from the mounting hole in the upper trim cover retainer.
6. Remove the horn switch ground wire eyelet from the upper airbag housing stud.
Driver Side Airbag Trim Cover Remove/Install
7. Disengage the four trim cover locking blocks from the lip around the outside edge of the driver side airbag housing and remove the housing from
the cover.
INSTALLATION
WARNING:
-
USE EXTREME CARE TO PREVENT ANY FOREIGN MATERIAL FROM ENTERING THE DRIVER SIDE AIRBAG MODULE,