Grand Cherokee 4WD V8-5.2L VIN Y (1998)
Vacuum Reservoir HVAC: Service and Repair
REMOVAL
1.
Remove the battery from the battery tray. Refer to Starting and Charging/Battery for the procedures.
2.
Remove the five screws that secure the battery tray to the vehicle.
Vacuum Reservoir Remove/Install
3.
Pull up the battery tray far enough to access and unplug the vacuum harness connector from the reservoir.
4.
Remove the battery tray and vacuum reservoir from the vehicle as a unit.
5.
Remove the two screws that secure the vacuum reservoir to the underside of the battery tray.
6.
Remove the vacuum reservoir from the battery tray.
7.
Reverse the removal procedures to install. Tighten the reservoir mounting screws to 1 N.m (10 in. lbs.). Tighten the battery tray mounting screws
to 8 N.m (70 in. lbs.).
