Grand Cherokee 4WD V8-5.2L VIN Y (1998)
Automatic Shut Down (ASD) Relay: Service and Repair
Power Distribution Center
The ASD relay is located in the power distribution center (PDC). The PDC is located in engine compartment. Refer to label on PDC cover for relay
location
REMOVAL
1. Remove PDC cover.
2. Remove relay by lifting straight up.
INSTALLATION
1. Check condition of relay wire terminals at PDC for corrosion or damage. Also check heights of relay terminal pins at PDC. Pin height should be
the same for all pins. Repair as necessary before installing relay.
2. Push relay into connector.
3. Install relay cover.
