Grand Cherokee 4WD V8-5.7L (2008)
Power Seat Switch: Testing and Inspection
POWER SEAT SWITCH
DRIVER WITHOUT MEMORY SEAT SYSTEM
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to the appropriate diagnostic information. If not OK, replace the faulty
power seat switch. If switch tests OK See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble
Code Tests and Associated Procedures.
PASSENGER SEAT
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to the appropriate diagnostic information table. If not OK, replace the faulty
power seat switch. If switch tests OK See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble
Code Tests and Associated Procedures.