jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Blend Door Actuator - Removal|Page 8765 > < Blend Door Actuator - Removal
Page 2
background image

10. Remove the three screws (1) that secure the blend door actuator (2) to the right side of the HVAC air distribution housing (3).
11. Remove the blend door actuator from the air distribution housing and disconnect the HVAC wire harness connector (4) from the actuator.
12. Remove the blend door actuator from the vehicle.

Blend Door Actuator - Removal|Page 8765 > < Blend Door Actuator - Removal