jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Headliner - Removal|Page 11764 > < Headliner - Removal|Page 11762
Page 2
background image

8.   If equipped, connect the headliner wire harness connector(s) to the inside rear view mirror.

9.   If equipped, connect the headliner wire harness connector to the rain sensor.

10.  Connect the headliner wire harness connector located at the left A-pillar.

11.  Install the grab handle above each rear passenger door.

12.  Install the A-pillar trim panel.

13.  Install the upper B-pillar trim panel.

14.  Install the upper C-pillar trim panel.

Headliner - Removal|Page 11764 > < Headliner - Removal|Page 11762