Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
1. Align the base of the bulb with the front fog lamp socket (1).
2. Push the bulb straight into the socket until the base is firmly seated.
3. Align the socket and bulb with the keyed opening on the back of the front fog lamp housing.
4. Insert the socket and bulb into the housing until the socket is firmly seated.
5. Rotate the socket (2) clockwise about 30 degrees to lock it into place. The socket connector receptacle should be pointed straight downward.
6. Reconnect the wire harness connector to the socket.
7. On vehicles with a diesel engine only, reinstall the plastic push-in fasteners that secure the front wheelhouse splash shield to the front fascia.
8. Lower the vehicle.
9. Reconnect the battery negative cable.
