jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

A/C Liquid Line|Page 2167 > < A/C Liquid Line|Page 2165
Page 1
background image

Hose/Line HVAC: Service and Repair
Line-A/C Discharge

Removal

5.7L/6.1L ENGINES

WARNING:  Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow the
warnings and cautions could result in possible personal injury or death.

NOTE:  LHD model shown. RHD model similar.

1. Disconnect and isolate the negative battery cable.

2. Recover the refrigerant from the refrigerant system.

3. Remove the grille.

4. Remove the air cleaner housing, air intake tube and the resonator.

5. Disconnect the wire harness connector (8) from the A/C pressure transducer (7) and remove the transducer from the A/C discharge line (5), if

required.

6. Remove the nut (6) that secures the A/C discharge line to the A/C condenser (4).

7. Disconnect the A/C discharge line from the A/C condenser and the retaining bracket (9) and remove and discard the dual-plane seal.

8. Remove the nut (2) that secures the A/C discharge line (1) to the A/C compressor (4).

A/C Liquid Line|Page 2167 > < A/C Liquid Line|Page 2165