Workshop Manuals Factory service & repair Jeep
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Jeep Grand Cherokee 4WD V8-5.7L VIN 2 (2007)01 · Relays and Modules
01 · Diagnostics

Alarm Module, (Vehicle Antitheft) (Description): Description and Operation

Make
Jeep
Model
Grand Cherokee 4WD
Engine
V8-5.7L VIN 2
Year
2007
Section
Alarm Module, (Vehicle Antitheft) › Description and Operation › Description
Relays and ModulesDescription · page 1 of 2
Alarm Module, (Vehicle Antitheft) (Description): Description and Operation – Jeep Grand Cherokee 4WD V8-5.7L VIN 2 (2007)

Alarm Module: Description and Operation
Description

DESCRIPTION

An intrusion module (1) is part of the premium version of the Vehicle Theft Alarm (VTA) in the Vehicle Theft Security System (VTSS). The premium
version of the VTA is only available in vehicles built for certain markets, where the additional features offered by this system are required. The intrusion
module is located in the passenger compartment. This unit is designed to work in conjunction with the intrusion sensor transmitter and intrusion sensor
receiver to provide interior motion detection and serves as the interface between the Front Control Module (FCM), the ElectroMechanical Instrument
Cluster (EMIC) (also known as the Cab Compartment Node/CCN) and the alarm siren.

The intrusion module has two integral mounts (2) that are secured by nuts to two weld studs on the right quarter inner panel just behind the right rear
wheel house. The module is concealed beneath the quarter inner trim panel. Concealed within the molded plastic housing is the circuitry of the module,
which includes a microprocessor. The module is connected through an integral connector receptacle (3) to the vehicle electrical system by a take out and
connector of the body wire harness.

The intrusion module unit cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

The same page in: Grand Cherokee 2WD V6-3.7L (2008), Grand Cherokee 2WD V6-3.7L (2008), Grand Cherokee 2WD V6-3.7L (2008), Grand Cherokee 2WD V8-4.7L Flex Fuel (2008), Grand Cherokee 2WD V8-4.7L Flex Fuel (2008), Grand Cherokee 2WD V8-4.7L Flex Fuel (2008), Grand Cherokee 2WD V8-4.7L VIN P Flex Fuel (2007), Grand Cherokee 2WD V8-4.7L VIN P Flex Fuel (2007), Grand Cherokee 2WD V8-4.7L VIN P Flex Fuel (2007), Grand Cherokee 4WD V6-3.0L DSL Turbo (2008), Grand Cherokee 4WD V6-3.0L DSL Turbo (2008), Grand Cherokee 4WD V6-3.0L DSL Turbo (2008).

Parts & tools for this job For 2007 Jeep Grand Cherokee 5.7L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.