Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
Power Steering Pump: Service and Repair
Pulley
Removal
REMOVAL
CAUTION: Do not reuse the old power steering pump pulley it is not intended for reuse. A new pulley must be installed if removed.
1. Remove the power steering pump assembly.
2. Remove the pulley (2) from the pump (1) using (OTC(R) 7185) power steering pulley removal tool (3) or equivalent.
Installation
5.7L & 3.0L DIESEL
NOTE: Power steering pulley (1) must only be installed to the first notch (2) on the pulley Do not install the pulley flush to the hub (3).