jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

NAG1 Automatic Transmission|Page 6687 > < NAG1 Automatic Transmission|Page 6685
Page 4
background image

The stator assembly is mounted on a stationary shaft which is an integral part of the oil pump. The stator (1) is located between the impeller (2) and the
turbine (4) within the torque converter case.

The stator contains an over-running clutch (1 - 4), which allows the stator to rotate only in a clockwise direction. When the stator is locked against the
over-running clutch, the torque multiplication feature of the torque converter is operational.

TORQUE CONVERTER CLUTCH (TCC)

NAG1 Automatic Transmission|Page 6687 > < NAG1 Automatic Transmission|Page 6685