Grand Cherokee 4WD V8-5.7L VIN 2 (2007)
1. Be certain that the rubber gasket is installed around the base of the rear washer nozzle and that it is in good condition.
2. Insert the nozzle nipple (3) through the mounting hole from the face of the Center High-Mounted Stop Lamp (CHMSL) (1) with the nozzle orifice
oriented downward.
3. Using hand pressure, press the nozzle firmly and evenly into the mounting hole until both integral latch features (2) are fully engaged on the back
of the CHMSL housing.
4. Reconnect the rear washer supply hose to the barbed nipple of the nozzle.
5. Reinstall the CHMSL onto the liftgate outer panel.
6. Reconnect the battery negative cable.
