Grand Cherokee 4WD SRT-8 V8-6.1L VIN 3 (2006)
NOTE: A total of 12 valve balls are located in the valve body, four made from plastic (4) and eight from steel (1, 3).
6. Install all check balls (1, 3, 4) and the central strainer (2).
7. Install the strainer (1) in the inlet to torque converter lock-up control solenoid valve.
8. Position the sealing plate (3) onto the valve body (4).
9. Install the valve housing (2) onto the valve body (4) and sealing plate (3).
10. Install the shift plate Torx bolts (1). Tighten the bolts to 8 Nm (71 inch lbs.).
11. Install leaf spring (5).