Liberty 2WD L4-2.4L VIN 1 (2005)
Amplifier: Description and Operation
AMPLIFIER CHOKE AND RELAY
Vehicles equipped with the premium speaker package have a amplifier choke and relay. The amplifier choke and relay is mounted to the lower
instrument panel above the pedals and towards the instrument panel center stack.
The amplifier choke and relay should be checked if there is no sound output from the speakers. The amplifier choke and relay can not be repaired or
adjusted and, if faulty or damaged, the unit must be replaced.
The amplifier choke and relay is used to control the supply of fused battery current to the front door speaker-mounted dual amplifiers. The speaker relay
is energized by a fused 12 volt output from the radio receiver whenever the radio is turned on. The wiring information includes wiring diagrams, proper
wire and connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire
harness connectors, splices and grounds.