Liberty 2WD L4-2.4L VIN 1 (2005)
Ignition Coil: Service and Repair
Ignition Coil
REMOVAL
1. Disconnect electrical connector at rear of coil.
2. Remove all secondary cables from coil.
Ignition Coil Location - 2.4L
3. Remove 4 coil mounting bolts.
4. Remove coil from vehicle.
INSTALLATION
1. Position coil to engine.
2. Install 4 mounting bolts. Refer to torque specifications.
3. Install secondary cables.
4. Install electrical connector at rear of coil.
5. Install air cleaner tube and housing.