Liberty 2WD V6-3.7L (2008)
Rear Door Panel: Service and Repair
Rear Door Trim Panel - Installation
REAR DOOR PANEL INSTALLATION
1. Carefully install the door trim panel to the door by lifting it upward and over the door lock into the trim panel. Attach the trim panel hooks (3) to
the carrier plate attachment points.
2. Install the screws (1) to the front door trim.
3. Install the cap screw cover (2) to the front door trim.
4. Connect the electrical connector (2) and install the power window switch (1).
5. Install the door handle trim bezel (3).