Liberty 2WD V6-3.7L (2008)
Hood Latch Release: Service and Repair
Hood Latch Release Handle
Removal
REMOVAL
1. Remove the cowl trim panel, See: Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim/Cowl Trim - Removal.
2. Remove the two bolts (2) from the handle (1).
3. Disconnect the hood release cable (3) from the handle (1).
4. Remove the handle (1) from the vehicle.
Installation
INSTALLATION
1. Install the hood release cable (3) to the handle (1).
2. Install the two bolts (2) to the handle (1) and tighten to 4 Nm (33 in. lbs.)
3. Install the cowl trim cover, See: Interior Moulding / Trim/Trim Panel/Service and Repair/Cowl Trim/Cowl Trim - Installation.