Liberty 2WD V6-3.7L (2008)
Door Lock Cylinder Switch: Testing and Inspection
TAILGATE CYLINDER LOCK SWITCH
1. Disconnect and isolate the battery negative cable.
2. Remove tailgate trim panel See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Liftgate Trim
Panel - Removal.
3. Disconnect tailgate cylinder lock switch harness connector.
4. Using a ohmmeter, test for resistances as shown in the Tailgate Cylinder Lock Switch Table.
5. If switch resistance is not correct, replace switch.