Liberty 2WD V6-3.7L (2008)
2. Connect the new heating element electrical connectors (3 & 4).
3. Connect the battery negative cable.
4. Verify heated seat system operation.
5. Install the appropriate seat cushion trim cover, See: Seat Cushion/Service and Repair/Procedures/Seat Cushion - Assembly or seat back trim cover,
See: Seat Back/Service and Repair/Procedures/Seat Back - Assembly.
NOTE: Make certain the seat wire harness is correctly routed through the seat and seat back. The excess wire between the cushion and
back elements should be securely tucked between the rear of the cushion foam and the rear carpet flap of the trim cover.