Liberty 2WD V6-3.7L (2008)
NOTE: On a new vehicle or after parking brake lining replacement, it is recommended that the parking brake system be conditioned prior to
use. This is done by making one stop from 25 mph on dry pavement or concrete using light to moderate force on the parking brake lever.
1. Reassemble the rear park brake shoes (1).
2. Adjust the rear brake shoes (5) See: Adjustments.
3. Install the axle shaft (2) See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and
Repair/Installation.
4. Install the disc brake rotor See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Installation.
5. Install the disc brake caliper See: Disc Brake System/Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper -
Installation.
6. Install the tire and wheel assembly See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement.
7. Lower the vehicle.