Liberty 2WD V6-3.7L (2008)
Power Steering Line/Hose: Service and Repair
Power Steering Hoses - Installation
Pressure Hose
PRESSURE HOSE
1. Install the pressure hose (2) at the gear.
2. Install pressure line (3) into pump. Thread pressure line tube nut into pump and tighten to 31 Nm (275 in. lbs.).
3. Install the pressure hose mounting bolts (2) to the frame. Tighten to 12 Nm (105 in. lbs.).
4. Install power steering belt. See: Drive Belt/Service and Repair/Removal and Replacement/Accessory Drive Belt - Installation
5. Install the fan shroud.
6. Install the washer/coolant reservoir assembly.
7. Install air cleaner housing See: Filters/Air Cleaner Housing/Air Filter Element/Service and Repair/Installation.
8. Fill and bleed power steering system See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and Repair.
9. Inspect for leaks.
Return Hose - Cooler To Reservoir
RETURN HOSE - COOLER TO RESERVOIR