jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Towing Information|Towing|Page 2012 > < Towing Information|Towing
Page 2
background image

6. Place transmission in park.

CAUTION: Towing the vehicle, with the rear wheels on the ground, at more than 30 mph (50 km/h) or for more than 15 miles (25 km)
can cause severe transmission damage.

TWO WHEEL DRIVE TOWING - FRONT END LIFTED

CAUTION: Many vehicles are equipped with air dams, spoilers, and/or ground effect panels. To avoid component damage, a wheel-lift towing
vehicle or a flat-bed hauling vehicle is recommended.

1. Attach wheel lift device to rear wheels.
2. Place the transmission in neutral.
3. Raise the rear of the vehicle off the ground and install tow dollies under rear wheels.
4. Attach wheel lift device to front wheels and raise vehicle to towing position.
5. Attach the safety chains.

CAUTION: Do not use steering column lock to secure steering wheel during towing operation.

6. Turn the ignition switch to the OFF position to unlock the steering wheel.
7. Secure steering wheel in straight ahead position with a clamp device designed for towing.
8. Place transmission in park.

FOUR-WHEEL - DRIVE VEHICLE TOWING

DaimlerChrysler Corporation recommends that a 4WD vehicle be transported on a flat-bed device. A Wheel-lift device can be used provided the
trailing wheels are off the ground and positioned in tow dollies.
 

WARNING: When towing a disabled vehicle and the drive wheels are secured in a wheel lift or tow dollies, ensure the transmission is in the
park position.

CAUTION: Many vehicles are equipped with air dams, spoilers, and/or ground effect panels. To avoid component damage, a wheel-lift towing
vehicle or a flat-bed hauling vehicle is recommended.

FOUR WHEEL DRIVE TOWING - REAR END LIFTED

WARNING: Ensure vehicle is on a level surface or the wheels are blocked to prevent vehicle from rolling.

1. Attach wheel lift device to front wheels.
2. Place the transmission in neutral.
3. Raise the front of the vehicle off the ground and install tow dollies under front wheels.
4. Attach wheel lift device to rear wheels and raise vehicle to towing position.
5. Attach safety chains. Route chains so not to interfere with tail pipe when vehicle is lifted.
6. Turn the ignition switch to the OFF position to unlock the steering wheel.

CAUTION: Do not use steering column lock to secure steering wheel during towing operation.

7. Secure steering wheel in straight ahead position with a clamp device designed for towing.
8. Place transmission in park.

FOUR WHEEL DRIVE TOWING - FRONT END LIFTED

WARNING: Ensure vehicle is on a level surface or the wheels are blocked to prevent vehicle from rolling.

1. Attach wheel lift device to rear wheels.
2. Place the transmission in neutral.
3. Raise the rear of the vehicle off the ground and install tow dollies under rear wheels.
4. Attach wheel lift device to front wheels and raise vehicle to towing position.
5. Attach the safety chains.

CAUTION: Do not use steering column lock to secure steering wheel during towing operation.

6. Secure steering wheel in straight ahead position with a clamp device designed for towing.
7. Place transmission in park.

Towing Information|Towing|Page 2012 > < Towing Information|Towing