Liberty 2WD V6-3.7L (2008)
1. Install the spring to the shock (if removed) See: Suspension Spring ( Coil / Leaf )/Service and Repair/Front Spring - Installation.
2. Install the shock assembly (1) to the vehicle.
3. Install the four upper shock mounting nuts. Tighten the nuts to 108 Nm (80 ft.lbs.).
4. Raise the knuckle (3) into place and reconnect the upper ball joint nut. Tighten the nut to 41 Nm (30 ft.lbs.) plus an additional 90° turn.
5. Install the clevis bracket bolt (4) at the lower control arm. See: Clevis Bracket/Installation. Tighten the bolt to 150 Nm (110 ft.lbs.). with full
vehicle weight.
6. Install the caliper See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake
Caliper - Installation.