Liberty 4WD L4-2.4L DOHC VIN 1 (2005)
PDC Relay Cassette Latches - Typical
2. From the top of the PDC housing, use a small screwdriver or a terminal pick tool (Special Tool Kit 6680) to release the two latches that secure the
relay cassette in the PDC.
3. Gently and evenly press the relay cassette down through the PDC housing.
PDC Relay - Typical
4. From the bottom of the PDC housing, remove the relay cassette from the PDC.
CAUTION: Do not remove the wiring and terminals from the terminal cavities of the faulty PDC relay cassette at this time. Refer to the Assembly
procedure that follows for the proper procedures for transferring the wiring and terminals to the replacement PDC relay cassette.
ASSEMBLY
POWER DISTRIBUTION CENTER ASSEMBLY
PDC B(+) TERMINAL MODULE