Liberty 4WD L4-2.4L DOHC VIN 1 (2005)
Camshaft Position Sensor: Service and Repair
REMOVAL
CMP Location - 2.4L
The Camshaft Position Sensor (CMP) on the 2.4L 4-cylinder engine is bolted to the right-front side of the cylinder head. Sensor position (depth) is
adjustable.
1. Disconnect electrical connector at CMP sensor.
2. Remove 2 sensor mounting bolts.
3. Remove sensor from cylinder head by sliding towards rear of engine.
INSTALLATION
The Camshaft Position Sensor (CMP) on the 2.4L 4-cylinder engine is bolted to the right-front side of the cylinder head. Sensor position (depth) is
adjustable.
Upper Timing Belt Cover/Bolts - 2.4L