Liberty 4WD L4-2.4L DOHC VIN 1 (2005)
![background image](/jeep/liberty_4wd/l4-2.4l_dohc_vin_1/Page-40003.png)
ABM Mounting
3. Install the ABM unit (2) to the vehicle.
4. Install the ABM mounting bracket nuts (3) and tighten to 14.1 N.m (125 in.lbs.).
5. Install brake lines (1) to the ABM (2) and tighten to 20 N.m (180 in.lbs.).
ABM Harness Connector
6. Install the wiring harness connector (4) to the ABM and push down on the release to secure the connector.
7. Install negative battery cable to the battery.
8. Bleed ABS brake system.