Liberty 4WD L4-2.4L DOHC VIN 1 (2005)
5. Squeeze the pliers to disengage the mount retaining bosses from the receptacle and, using a gentle rocking motion, pull the pliers and the
receptacle base out of the mount.
6. Pull the receptacle base away from the instrument panel far enough to access the instrument panel wire harness connector.
7. Disconnect the instrument panel wire harness connector from the cigar lighter or power outlet receptacle base connector receptacle.
8. Remove the cigar lighter or power outlet mount from the instrument panel.
INSTALLATION
1. Reconnect the instrument panel wire harness connector to the cigar lighter or power outlet receptacle base connector receptacle.
2. Install the cigar lighter or power outlet mount into the instrument panel.
3. Align the splines on the outside of the cigar lighter or power outlet receptacle base connector receptacle with the grooves on the inside of the
mount.
4. Press firmly on the cigar lighter or power outlet receptacle base until the retaining bosses of the mount are fully engaged in their receptacles.
5. Install the cigar lighter knob and element into the cigar lighter receptacle base, or the protective cap into the power outlet receptacle base.
6. Reconnect the battery negative cable.