Liberty 4WD L4-2.4L DOHC VIN 1 (2005)
Constant Velocity Joint Boot: Service and Repair
Joint/Boot C/V Outer
JOINT/BOOT C/V OUTER
REMOVAL
1. Place shaft in vise with soft jaws and support C/V joint.
CAUTION: Do not damage C/V housing or half shaft.
2. Remove clamps (2) (4) with a cut-off wheel or grinder (Fig. 7).
3. Slide the boot down the shaft.
4. Remove lubricant to expose the C/V joint snap-ring.
5. Spread snap-ring (1) and slide the joint off the shaft (Fig. 8).
6. Slide boot off the shaft and discard old boot.