Liberty 4WD L4-2.8L DSL Turbo VIN 5 (2006)
11. Apply the supplied Grease in the following manner. (Fig 6) (Fig 7)
a. 1/4 packet into the Motor Drum Pocket.
b. 1/4 packet along the Rail contact locations.
c. 1/2 packet onto a paper towel and pull the cable through the grease.
12. Install the new lift plate cable assembly into the rail about 1/3 the way up the rail.
13. Install the motor and mounting bracket back onto the window regulator. Align the drum housing pilots with the motor bracket and motor (Fig 3).
14. Hand torque the screws to 2.5 Nm (22 in lbs).
15. Install the small black plastic bumper in the end of the rail.