Liberty 4WD L4-2.8L DSL Turbo VIN 5 (2006)
Power Steering Pump: Service and Repair
Pulley
PULLEY
REMOVAL
1. Remove the engine cooling fan.
2. Remove the fan shroud.
3. Remove the serpentine drive belt.
4. Remove the three bolts securing the pulley to the pump.
INSTALLATION
1. Install the pulley to the pump shaft.
2. Install the three bolt securing the pulley to the pump .
3. Install the serpentine belt.
4. Install the fan shroud.
5. Install the engine cooling fan.