Liberty 4WD V6-3.7L (2009)
Brake Rotor/Disc: Removal and Replacement
Front
FRONT
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to
hang the caliper securely.
3. Remove the caliper adapter (2). See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper Adapter - Removal.
4. Remove the disc brake rotor (3).
Rear
REAR
1. Raise and support the vehicle
2. Remove the tire and wheel assembly.
3. Remove the disc brake caliper adapter (2) and pads (3), See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper -
Removal.
4. Remove the retaining clips and rotor assembly (1).
Front
FRONT