Liberty 4WD V6-3.7L (2009)
NOTE: Illustration shown with air distribution housing removed from HVAC housing for clarity.
1. Install the upper front passenger side floor duct (2) to the passenger side of the air distribution housing (3) and install the two retaining screws (1).
Tighten the screws to 1.2 Nm (10 in lbs.).
2. Connect the lower front passenger side floor duct (3) to the upper front passenger side floor duct (4).
3. Install the two screws (2) that secure the lower front passenger side floor duct to the bottom of the HVAC housing (1). Tighten the screws to 1.2
Nm (10 in lbs.).
4. Install the HVAC housing assembly See: Housing Assembly HVAC/Service and Repair/Removal and Replacement/HVAC Housing - Installation.
Instrument Panel Center Duct - Installation
INSTALLATION
1. Rotate the center instrument panel duct as necessary to position the duct into the instrument panel.