jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Child Seat Anchor - Description|Page 6740 > < Occupant Classification Module - Removal|Page 6733
Page 1
background image

Child Seat Tether Attachment: Description and Operation
Child Seat Anchor - Description

DESCRIPTION

This vehicle is equipped with a Lower Anchors and Tether for Children, or LATCH child restraint anchorage system. The second row seats in these
vehicles are equipped with a fixed-position child restraint upper tether anchor (2) for both the center and the two outboard seating positions, and child
restraint lower anchors (1) for the two outboard seating positions.

The upper tether anchors (1) are each integral to the second row seat back panels. These anchors are each constructed from short lengths of heavy-gauge
steel wire that is securely welded into stamped steel cups that are integral to the seat back panels. There is a separate molded plastic trim bezel (2)
located around each of these anchors. The child restraint upper tether anchors cannot be adjusted or repaired and, if ineffective or damaged, they must be
replaced as a unit with their respective second row seat back panels.

The lower anchors (2) for this vehicle are integral to their respective second row seat brackets, which are secured to the rear floor panel at the front with

Child Seat Anchor - Description|Page 6740 > < Occupant Classification Module - Removal|Page 6733