Liberty 4WD V6-3.7L (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Hose - Installation
Pressure Hose
PRESSURE HOSE
1. Install the pressure hose (2) at the gear.
2. Install pressure line (3) into pump. Thread pressure line tube nut into pump and tighten to 31 Nm (275 in. lbs.).
3. Install the pressure hose mounting bolts (2) to the frame. Tighten to 12 Nm (105 in. lbs.).
4. Install power steering belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Removal and Replacement/Serpentine Accessory Drive Belt - Installation
5. Install the fan shroud.
6. Install the washer/coolant reservoir assembly.
7. Install air cleaner housing See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Filter
Element/Service and Repair/Air Cleaner - Installation
8. Fill and bleed power steering system See: Service and Repair/Steering - Power Steering System Bleeding.
9. Inspect for leaks.
Return Hose - Gear to Cooler
RETURN HOSE - COOLER TO GEAR