Liberty 4WD V6-3.7L (2009)
15. Position the cowl grille (1) and engage the clips to the bottom of the windshield.
16. Install the four push pins (2) through the cowl grille (1) and into the body (4).
17. Install the hood seal (3).
18. Install the wiper arms, See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arm - Installation.
19. Install inside rear view mirror, See: Body and Frame/Mirrors/Service and Repair/Interior Rearview Mirror - Installation.
20. After urethane has cured, water test windshield to verify repair.
