Liberty Limited Edition 2WD V6-3.7L VIN K (2002)
Camshaft Bearing: Specifications
CAMSHAFT BEARING CAP TORQUE/PROCEDURE:
Working in 1/2 turn increments, tighten the bearing cap retaining bolts starting with the middle cap working outward.
Bearing Cap Bolt ................................................................................................................................................................................... 11 Nm (100 in. lbs.)
NOTE: Caps should installed so that the stamped numbers on the caps are in numerical order, (1 - 4) from the front to the rear of the engine. All caps
should be installed so that the stamped arrow on the caps point toward the front of the engine.