Liberty Sport 2WD L4-2.4L VIN 1 (2002)
5. Disconnect the lock knob rod (1) and lock cylinder link rod at the latch.
6. Remove the screws (5) and remove the latch assembly (3).
7. Disconnect the electrical connectors.
INSTALLATION
1. Connect the latch electrical connectors.
2. Install the latch assembly (3) into the door (4) and install the screws (5).
3. Tighten the latch screws (5) to 11 N.m (95 in.lbs.).
4. Connect the lock cylinder link rod and lock knob rod at the latch.
5. Connect the exterior handle actuator rod at the handle.