Liberty Sport 2WD L4-2.4L VIN 1 (2002)
Fig.12 A/C Heater Control Head (Rear View)
6. Unplug the wire harness connectors from the back of the A/C Heater control.
INSTALLATION
1. Plug the two wire harness connectors and one vacuum connector into the back of the A/C Heater control.
2. Position the A/C Heater control in the instrument panel bezel and secure it with four screws. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Reinstall the center bezel onto the instrument panel.
4. Connect the battery negative cable.