Liberty Sport 4WD L4-2.4L VIN 1 (2002)
3.
With the front skid plate repositioned to the right side, measure the clearance between the left forward corner of the front skid plate and the front
crossmember (Fig. 1).
4.
If a clearance of 3.1 mm (1/8 in.) or more is now present between the front skid plate and the front crossmember, tighten the front skid plate
attaching bolts to 61 Nm (45 ft. lbs.). A new front skid plate is not required.
5.
If the clearance between the front skid plate and front crossmember is less than 3.1 mm (1/8 in.), instal a new front skid plate.
6.
Position the new front skid plate to right side and tighten the front skid plate attaching bolts to 61 Nm (45 ft. lbs.).
NOTE:
THE TECHNICIAN SHOULD BE AWARE THAT WHEN A FRONT SKID PLATE IS INSTALLED FOLLOWING ANY SERVICE ACTIVITY,
THE SKID PLATE SHOULD BE POSITIONED AS FAR TO THE RIGHT SIDE OF THE VEHICLE AS IS POSSIBLE. THIS SHOULD HELP
PREVENT POSSIBLE CONTACT BETWEEN THE FRONT SKID PLATE AND THE FRONT CROSSMEMBER.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE
FAILURE CODE:
