Liberty Sport 4WD L4-2.4L VIN 1 (2002)
Headlamp Bulb: Service and Repair
REMOVAL
North America
1. Disconnect and isolate the battery negative cable.
Fig.23 Headlamp Bulb Lock Ring
2. Reach behind the headlamp unit from the engine compartment side of the upper radiator crossmember to access the headlamp bulb lock ring.
3. Firmly grasp the lock ring on the back of the headlamp unit housing.
4. Rotate the lock ring on the back of the headlamp unit housing counterclockwise about 30 degrees.
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life
will result.
Fig.24 Headlamp Bulb Remove/Install
5. Pull the lock ring, socket, and bulb straight out of the headlamp unit housing and up from behind the upper radiator crossmember.
6. Disconnect the grille opening reinforcement wire harness connector for the headlamp bulb from the connector receptacle on the bulb socket.
7. Remove the bulb and bulb socket from the lock ring as a unit.
Rest-Of-World
1. Disconnect and isolate the battery negative cable.
2. Remove the headlamp unit from the grille opening reinforcement. (Refer to LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT -
REMOVAL).
