Liberty Sport 4WD L4-2.4L VIN 1 (2002)
The front wiper module operation is controlled by the battery current inputs received by the wiper motor from the wiper ON/OFF and wiper
high/low relays. The wiper motor speed is controlled by current flow to either the low speed or the high speed set of brushes. The park switch is a
single pole, single throw, momentary switch within the wiper motor that is mechanically actuated by the wiper motor transmission components.
The park switch alternately closes the wiper park switch sense circuit to ground or to battery current, depending upon the position of the wipers on
the glass. This feature allows the motor to complete its current wipe cycle after the wiper system has been turned OFF, and to park the wiper
blades in the lowest portion of the wipe pattern. The automatic resetting circuit breaker protects the motor from overloads. The wiper motor crank
arm, the two wiper linkage members, and the two wiper pivots mechanically convert the rotary output of the wiper motor to the back and forth
wiping motion of the wiper arms and blades on the glass.
