Patriot 2WD L4-2.0L (2008)
1. Install the trim ring (2) onto the shifter console and seat fully.
2. Install the screws (3).
3. Install the shift boot (5) onto the trim ring (2) and seat fully.
4. Install the shift knob (4) onto the shifter (1) and seat fully.
Floor Console - Removal
REMOVAL
1. Set the parking brake lever in the up position.
2. Remove the two screws from the console bin.
3. Lift the console (4) up at the front from underneath right hand and left hand sides of console base at the same time and release the console clips
(1).
4. Lift console from rear and release the rear clips (3).
5. Disconnect the electrical connector (6).