Patriot 2WD L4-2.0L (2008)
NOTE: If a seal on an air door is deformed or damaged, the air door must be replaced.
13. Disengage the air door(s) (1, 2, 3 and 4) from the mode door levers and remove the air doors from the air distribution housing (5).
NOTE: To remove the mode door levers, disengage the retaining tabs on the inside of the air distribution housing and pull the levers straight
out of the housing.
14. Remove the four mode door levers (1, 2, 3 and 4) from the right side of the air distribution housing (5).
Air Inlet Housing
HOUSING-AIR INLET
NOTE: The air inlet housing must be removed from HVAC housing and disassembled for service of the recirculation-air door.
NOTE: LHD model with A/C shown in illustrations. RHD and heater-only models similar.