Patriot 2WD L4-2.0L (2008)
CAUTION: Do not re-use the oil pan gasket. Remove any moisture, oil, and used gasket material from the surface where the new gasket is to be
installed. When installing the oil pan gasket, align the dowel pin with the dowel pin hole in the oil pan gasket.
11. Install the oil pan gasket (1) onto the transaxle case.
CAUTION: When installing the oil pan, align the dowel pin of the transaxle case with the dowel pin hole of the oil pan.
12. Install the oil pan on the transaxle case (1). Install and tighten the mounting bolts to 8 Nm (70 in. lbs.).
13. Install the snap ring (1) onto the terminal body.
14. Fill transmission with the required fluid.See: Service and Repair/Procedures/Transmission Fill