jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Satellite Radio Antenna - Removal|Page 5986 > < Satellite Radio Antenna - Removal|Page 5984
Page 3
background image

1. Disconnect and isolate the battery negative cable.
2. Remove antenna mast by unscrewing mast from antenna body. On vehicles equipped with manual retractable antenna, lower antenna fully.
3. Remove shroud (1), if equipped.
4. Remove antenna nut (2) and adapter (3) 

5. Disconnect antenna body cable from instrument panel antenna cable.
6. Remove inner fender shield as necessary to gain access to mounting fasteners.
7. Remove antenna body and cable (2) assembly from fender (1)

Antenna - Installation

INSTALLATION

1. Position antenna body and cable assembly (2) into fender (1).
2. Insert antenna cable through the opening in fender. 

Satellite Radio Antenna - Removal|Page 5986 > < Satellite Radio Antenna - Removal|Page 5984