Patriot 2WD L4-2.4L (2009)
34. Remove engine from repair stand and install engine lift chain (1).
35. Install crankshaft rear oil seal See: Seals and Gaskets/Crankshaft Main Bearing Seal/Service and Repair/Rear Crankshaft Oil Seal - Installation.
36. Install drive plate/flex plate using new bolts. Tighten bolts to 95 Nm (70 ft. lbs.).
37. Attach transaxle to engine. Tighten bellhousing bolts to 101 Nm (75 ft. lbs.).
38. Install the engine assembly See: Service and Repair/Removal and Replacement/Engine - Installation.
39. Install new oil filter (1) and fill with oil.
40. Fill with coolantSee: Cooling System/Service and Repair.
41. Start engine and check for leaks.
42. Install engine cover.