Fuel Gauge Sender Removal for Patriot 2WD L4-24L (2009)
Fuel Gauge Sender: Service and Repair
Fuel Pump Module - Removal
FWD
WARNING: Risk of injury to eyes and skin from contact with fuel, Wear protective clothing and eye protection. Risk of poisoning from
inhaling and swallowing fuel. Pour fuel only into appropriately marked OSHA approved containers. Failure to comply may result
in serious or fatal injury.
1. Perform Fuel System Pressure Release procedure. See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Fuel Pressure
Release/Service and Repair
2. Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
3. Remove the negative battery cable.
4. Remove the rear seat cushion.
5. Rear seat cushion loose.
